Quality Center User Group Setup

For each project in Quality Center:

1. Open Quality Center.

2. If you are already listed as a user for the project, skip this step and proceed to Step 3.
If not, do the following to add yourself to the project:
a. Login to the Quality Center and click on the Site Administration link on the Home Page
b. Select the Site Projects tab.
c. In the project tree on the left, select the Project.
d. In the right side pane, select the Project Users tab.
e. Add yourself as a user to the project.
f. Check the Project Administrator checkbox.
g. Leave yourself logged in as an administrator in case you need to add yourself as a user to another project.
h. Login to the project in Quality Center and click on the Quality Center link on the Home Page.

3. Select the Domain and Project.

4. Click on Login.
5. Once the project comes up, select Tools > Customize…
6. Click on the Set Up Groups link on the left.
7. Click on the New button.
8. In the Name field, enter “Defect-Only”.
9. In the Create As field, select QATester.
10. Click Yes on the Confirm dialog.
11. Click on the New button.
12. In the Name field, enter “BPT”.
13. In the Create As field, select QATester.
14. Click Yes on the Confirm dialog.
15. Click on Save.
16. Click OK on the Information dialog.
17. Click on the Customize Module Access link on the left.
18. In the Customize Module Access display on the right, modify the groups so that they appear as follows:


19. Click on Save.
20. Click OK on the Information dialog.
21. Click on Return.